The third source element in my music system is the digital music server.
In a nutshell, all my music files are held elsewhere on my home network. Music is accessed via a laptop computer and the digital stream is fed out through a DAC to the amplifier.The set up consists of three elements:
Laptop : Currently, this is a Dell with one or two issues, like turning itself off or freezing after an hour or so ...
Software : I'm getting good results with Media Monkey
DAC : Cambridge DacMagic
The laptop connects to the home network via WiFi. This means the music files can be held elsewhere so HDD noise is kept to a minimum. Most files are in .flac format. This is a lossless compression format. .mp3s are lossy and it's possible to spot the degradation in a .mp3 file on playback through a reasonable system.
.flacs have different levels of compression, but this only makes a difference to the amount of processor power the computer needs to decode the file. Since this laptop does little else, it's not really an issue.
Media Monkey both catalogues the music files and processes the digital file for export as a digital stream from the laptop via a USB port. When the DacMagic was first plugged into the computer it was identified as a USB sound card. Media Monkey can use a variety of output modules. At the moment I'm using the standard wave output.
The DacMagic can switch between three different digital sources and has three switchable digital filter profiles. The device converts the digital input to a regular analogue output which plays back through my Marantz amplifier.
The music source files are either ripped from the original CDs or, more and more often, downloaded direct from websites run by the artist's label or retailers who are set up for digital delivery. It is possible to find music which is recorded at a far higher fidelity than can be delivered via CD ... more about digital music files another day.
Sunday, 21 February 2010
HiFi : Source III : Home Music Server
Posted by
Alan E Hill
at
14:06
0
comments
Labels: cambridge dacmagic, flac, home music server, media monkey, wifi
HiFi : Source II : Digital Disc
This article sets the digital disc playback into the scheme of things.
So far I haven't explored the world of BluRay and other exotic disc systems, and at this stage I'm unlikely to given the success I'm starting to have with digital playback from computer music files ... more about this later.However, like vinyl, I think CD will be around for a while yet.
The CD playback trail here consists of two parts:
CD transport/player : Marantz CD5001
DA converter : Cambridge DacMagic
The Marantz has been superseded by the CD5003, but I doubt if it sounds any better. Besides, I am using the player only as a disc transport by taking the digital output direct and playing it through the DacMagic which converts the digital signal to analogue for playing through the amplifier.The DacMagic also has the ability to filter and profile the output although any changes are barely perceptible. It also handles the digital output from the computer when using it as a music server and switches between up to three digital sources.
So, basically, all digital sources are directed via the DacMagic and its DAC to the amplifier.
Posted by
Alan E Hill
at
12:40
0
comments
Labels: cambridge dacmagic, dac, digital home audio, marantz cd5001, music server
HiFi : Source I : Turntable
I've covered the setting up of my turntable previously. This article is to put the turntable in context in my set up.
The analogue trail consists of three elements:
Cartridge: Ortofon 2M Red
Turntable/arm combination: Pro-Ject Classic Cherry
Pre-amplifier: Pro-Ject USB II BoxAs I said, I've already covered aspects of the turntable/cartridge set up and some tweaks remain to be done.
I noted before some problems playing certain passages on vinyl, but I've checked the sound against the same track on CD and the roughness is there too, so I'm wondering if the problem is elsewhere, possible in the amplification or speakers. Even so, it's the same through the head-amp and headphones, so maybe it's the recording itself. Since it seems confined to one recording in particular maybe that's it.Until recently, I've been playing the turntable through the phono input on the Marantz PM5003 amp. But following developments in my experiments using a digital music server, I'm now using the phonostage in the Pro-Ject USB II Box. This also acts as an AD converter and outputs a digital stream from the turntable into a laptop ... but I'm getting ahead of myself.
I can't say if the Pro-Ject phonostage is superior to the Marantz. I can detect no difference on a slightly more than casual comparison. Certainly it sounds more than acceptable.
The analogue trail to the amplifier is carried using QED Silver Spiral leads. These are a heritage item and are no longer in production. I've had them for years and have yet to hear a reason to upgrade them. I'm a pragmatist when it comes to cables ... I belive in solid, good quality cables, but don't buy the rather exotic claims of the type of cable which probably cost more than your electronic components.
Next: the CD trail ...
Posted by
Alan E Hill
at
10:09
0
comments
Labels: ortofon 2M red, Project Classic Cherry turntable, project USB II Box
Wednesday, 17 February 2010
Been Around World : Phonostage Visitors
I kept this list in the sidebar, but it's become unwieldy so here it is for the last time.
Africa:


Asia:















N America:




C America:


S America:





Europe:

























Eurasia:




Oceania:


Posted by
Alan E Hill
at
07:00
0
comments
© 2010 Alan E Hill